Allows the capillary sensor to be fitted in place of the standard electrical transmitter.
This thermal switch also comes with the Aluminium Radiator as there is a pre-drilled boss in it. It can also be fitted to other radiators but be prepared to remove your radiator and have a 22mm boss welded in at a radiator shop.
When fitting the Electric Water Pump this bung fills the hole where the old Water Pump fits.
Use in conjunction with Electric Water Pump Only or Electric Water Pump Conversion Kit
SURCHARGE FOR ITEM PKC300
Fits neatly into the top radiator hose and you can also adjust the temperature.
2 Hoses to go with our Aluminium Header Tank.
2 week delivery on this item
Available to order. Please allow approximately 3 weeks for delivery.
If you are buying the Supergill Radiator you will need to select this item for the refundable surcharge.
If you are buying the Supergill you will need to select this item for the refundable surcharge.
Probably the last set of hoses you'll ever need to buy!
The hose are of 3-ply, 4.5mm wall construction in Polyester Silicone and can withstand temperatures of -50°C (-58°F) to +170°C (338°F)
Hose max working pressure: 3 ply = 5 bar (70psi), 4 ply = 8 bar (112psi)
Size tolerance: +/- 0.5mm
Unlike normal hoses, the inside walls of these hoses do not deteriorate and contaminate the water system!
All hoses are hand-made in the United Kingdom.
Also available to order (2 - 3 weeks) BLUE
Refurbished heater radiator matrix sold on an exchange basis only with a surcharge. When ordering you must select p/n PKC300-SUR.
If you are buying this product you will also need to select the surcharge item below. This is a refundable surcharge upon receipt of your old unit.
Fitted with 22mm boss to accept thermastic sensor switches.