Reviews Reviews

Propshaft and Final Drive

Sort Alphabetically: A to Z
96 Per Page
3/8 UNF Nyloc Nut
£0.48 (£0.58 inc VAT)
+ −
Adjusting Nut Lock Washer
£2.95 (£3.54 inc VAT)
In stock
+ −
Bolt - Propshaft Flange
£0.50 (£0.60 inc VAT)
Out-of-stock
Circlip - Axle Extension Housing Bearing
£1.00 (£1.20 inc VAT)
In stock
+ −
Diff Backplate Gasket
£3.95 (£4.74 inc VAT)
Colour may differ.
In stock
+ −
Diff Backplate Gasket (2000)
£1.70 (£2.04 inc VAT)
Out-of-stock
Diff Cone and Cup Mount Bush Kit
£50.50 (£60.60 inc VAT)
Colour may differ to image.
Out-of-stock
Diff Extension - Surcharge
£80.00 (£96.00 inc VAT)
+ −
Diff Extension - With Strengthened Housing
£100.00 (£120.00 inc VAT)
This is a reconditioned exchange item.  Please also select the  Surcharge when ordering this item. Please allow 5-10 days for delivery as...
+ −
Diff Extension Housing Bearing - KSM
£22.00 (£26.40 inc VAT)
In stock
+ −
Diff Extension Housing Bearing - RHP
£40.00 (£48.00 inc VAT)
Out-of-stock
Diff Mounting Bracket
£260.00 (£312.00 inc VAT)
Out-of-stock
Diff Oil Side Seal
£2.99 (£3.59 inc VAT)
In stock
+ −
Diff Pinion Oil Seal - Later Type
£4.15 (£4.98 inc VAT)
In stock
+ −
Diff Pinion Spacer - Collapsible
£5.90 (£7.08 inc VAT)
Out-of-stock
Diff Side Bearing - Inner
£14.25 (£17.10 inc VAT)
In stock
+ −
Diff Side Bearing - Outer
£8.75 (£10.50 inc VAT)
In stock
+ −
Diff Side Bearing - Outer - Quality RHP
£32.00 (£38.40 inc VAT)
SIDE DIFF DIFFERENTIAL INPUT SHAFT BEARING
In stock
+ −
Diff. Mounting Plate Retaining Nut Lock Tab Plate
£2.40 (£2.88 inc VAT)
In stock
+ −
Differential (Recon. Exch) 3.45:1 Ratio
£610.00 (£732.00 inc VAT)

When ordering this item you will need to select the below surcharge item. This will then be refunded upon receipt of your old unit.

Out-of-stock
Differential (Recon. Exch) 3.45:1 Ratio - Surcharge
£250.00 (£300.00 inc VAT)

When ordering the above Diff. you will need to select this surcharge option.  It will then be refunded to you upon receipt of your old unit.

+ −
Differential (Recon. Exch) 3.66.1 - New Crown Wheel & Pinion Cut Using Klingelnberg Method
£1,250.00 (£1,500.00 inc VAT)

These are fully reconditioned diffs with our own crown wheels and pinions. The crown wheel and pinion are UK made with a German cut design - Klingelnberg cutting (BMW/Mercedes), hardened and then matched.

When ordering this item you will need to select the SURCHARGE too. This will then be refunded upon receipt of your old unit.

In stock
+ −
Differential (Recon. Exch) 3.66.1 - New Crown Wheel & Pinion - Surcharge
£250.00 (£300.00 inc VAT)
Surcharge re Differential with New Crown Wheel and Pinion. Please select this too when ordering the unit. Will be refunded upon receipt of you old unit.
+ −
Differential (Recon. Exch) 3.7:1 Ratio
£610.00 (£732.00 inc VAT)

When ordering this item you will need to select the below surcharge item. This will then be refunded upon receipt of your old unit.

In stock
+ −
Differential (Recon. Exch) 3.7:1 Ratio - Surcharge
£250.00 (£300.00 inc VAT)

When ordering the above Diff. you will need to select this surcharge option.  It will then be refunded to you upon receipt of your old unit.

+ −
Differential (Recon. Exch) Limited Slip With New Crown Wheel & Pinion
£1,840.00 (£2,208.00 inc VAT)

This Rear Axle is fully reconditioned and has has a Helical Spur, limited slip, differential, along with our own crown wheels and pinions. The crown wheel and pinion are UK made with a German cut design - Klingelnberg cutting (ala BMW/Mercedes), hardened and then matched.

When ordering this item you will need to select the SURCHARGE too.  This will then be refunded upon receipt of your old unit.  

Out-of-stock
Drive Flange Nyloc Nut
£0.30 (£0.36 inc VAT)
5/8" UNF Thread Size
In stock
+ −
thumbnail_Drive Shaft.jpg
Driveshaft - Pair - Rilsan Coated
£370.00 (£444.00 inc VAT)

These driveshafts have the Rilsan coated splines and come complete with 2 UJs.  The inner UJ (axle end) is larger diameter to prolong life and reduce wear.

In stock
+ −
thumbnail_Drive Shaft and Hub Assy.jpg
Driveshaft - Pair - Rilsan Coated - Complete With Recon. Rear Hub Assy.
£570.00 (£684.00 inc VAT)

This is for a pair of our new Rilsan coated driveshafts, complete with reconditioned rear hub assemblies fitted. However, please note that these CAN ONLY BE SOLD AND EXCHANGED FOR DRIVESHAFTS WITH UJ's SECURED WITH CIRCLIPS as earlier versions are not able to be refurbished.

When ordering this item you will need to also select the Rear Hub Assembly Surcharge (X 2) as the hubs are an exchange item.

+ −
Driveshaft Dust Shield
£6.55 (£7.86 inc VAT)
In stock
+ −
Driveshaft Rubber Gaiter
£4.50 (£5.40 inc VAT)
In stock
+ −
Nut - Castle Headed
£1.95 (£2.34 inc VAT)
In stock
+ −
Propshaft (35 BW Auto)
£350.00 (£420.00 inc VAT)
Available from our supplier.  Please allow 2 weeks for delivery. Quality UK made part. Larger diameter shaft to offer improved shaft leverage and...
Out-of-stock
Propshaft (65 BW Auto)
£365.00 (£438.00 inc VAT)
Available from our supplier.  Please allow 2 weeks for delivery. Quality UK made part. Larger diameter shaft to offer improved shaft leverage and...
Out-of-stock
Propshaft - Manual With Overdrive
£365.00 (£438.00 inc VAT)
As original, manufactured in the UK to high tolerances. Split two piece rubber bonded.
Out-of-stock
Propshaft - ZF - 4 Speed
£375.00 (£450.00 inc VAT)
As original, manufactured in the UK to high tolerances. Split two piece rubber bonded.
In stock
+ −
Propshaft Grease Nipple - 1/4 UNF Straight
£1.00 (£1.20 inc VAT)
NOTE: Do not leave this in the propshaft.
In stock
+ −
Rear Hub Adjuster Spacer (134584)
£15.80 (£18.96 inc VAT)
In stock
+ −
thumbnail_Rear Hub Bearing Kit.jpg
Rear Hub Bearing Kit - With Quality Bearings
£35.50 (£42.60 inc VAT)

Kit complete with spacer.  We only use high quality Timken bearings in these kits.

In stock
+ −
Rear Hub Collapsible Spacer
£5.70 (£6.84 inc VAT)
In stock
+ −
Rear Hub Inner Seal - Steel Cased
£4.50 (£5.40 inc VAT)
In stock
+ −
Rear Hub Inner Seal - Steel Cased - Neoprene
£4.50 (£5.40 inc VAT)
In stock
+ −
REAR HUB RETAINING NUT WASHER
£1.30 (£1.56 inc VAT)
+ −
Speedi Sleeve 2" - Diff Extension Housing Shaft
£33.50 (£40.20 inc VAT)
In stock
+ −
Split Pin
£0.25 (£0.30 inc VAT)
+ −
Universal Joint - Driveshaft & Propshaft - Heavy Duty
£27.00 (£32.40 inc VAT)
Made with longer rollers and incorporating a thrust washer.
In stock
+ −
Washer - Diff Mounting - Stainless
£3.30 (£3.96 inc VAT)
Out-of-stock