It is a direct replacement for the original, but unlike the originals will not rot. It uses the original sender unit, filler neck and breather pipes, so is fully interchangerble. Also, the design has straighter sides than the original so will hold more fuel.
Brand new development. A pair of Constant Velocity Jointed Stronger Driveshafts which provide smoother operation, less power loss, better handling with no sliding spline to lock and clunk. No modifications required to the trailing arms.
Available to order, please contact us if you wish to order.
This kit is the EPW80 kit is suitable for the majority of car cooling applications, with its flow rate of 80 litres/min. Davies Craig estimate a potential gain of up to 8kW/10bhp for a typical 4-litre engine, and matching coolant flow to engine needs.
It comes with the new style 8001 LCD controller.
You may also want our brass bung that fills the place of the old water pump.
CLICK HERE FOR MORE DETAILS
We also do a Silicone Hose Kit for the Electronic Water Pump
When fitting the Electric Water Pump this bung fills the hole where the old Water Pump fits.
Use in conjunction with Electric Water Pump Only or Electric Water Pump Conversion Kit
To be used in conjunction with our High Output Alternator, for relocating the Alternator.
As from June 08 the wiring harness is an improved design with molded plastic alternator plug, warning light and battery cable terminals, as O.E. spec.
NOTE: This product will not align with an original type alternator.
If you are buying this product you will also need to select the surcharge item below. This is a refundable surcharge upon receipt of your old unit.
These driveshafts have the Rilsan coated splines and come complete with 2 UJs. The inner UJ (axle end) is larger diameter to prolong life and reduce wear.
Kit Includes the Following:-
Excludes Headlights
Ever wished you could see better when driving your Stag on a dark night?
Here is the solution - This clever wiring harness enables all four headlamps, to be on either dip or main beam simultaneously.
The kit contains 4 Headlamps, 4 H4 Bulbs
and a Dip/Main Beam Wiring Harness.
To mark the 40th Anniversary of the Triumph Stag in 2010, we commissioned Brian James to produce a painting which would encompass the best of 1970. The Stag is based on one of the early pre-production models and of course the iconic image of Concorde speaks for itself.
The print is a signed, Limited Edition. Only 100 will be produced.
The size of the print is 450mm x 600mm.
The print comes unframed and delivery time is usually within 10 days.
Click Here to read more about Brian and see our other Brian James prints.
If you are buying the Supergill Radiator you will need to select this item for the refundable surcharge.
These stainless steel cylinder head studs have been specially manufactured for us by a top motorsport engineer. They are waisted, have a rolled thread and a bolt head top instead of a slot.
Significantly improves braking power and reduced un-sprung weight. Our kit contains: 2 Vented Brake Discs, 2 Wilwood Calipers, 2 Adapters, Set of Mintex Pads, Braided Hoses and Fixings.
This kit is to order so please allow 10 days for delivery.
This is for a pair of our new Rilsan coated driveshafts, complete with reconditioned rear hub assemblies fitted. However, please note that these CAN ONLY BE SOLD AND EXCHANGED FOR DRIVESHAFTS WITH UJ's SECURED WITH CIRCLIPS as earlier versions are not able to be refurbished.
When ordering this item you will need to also select the Rear Hub Assembly Surcharge (X 2) as the hubs are an exchange item.
New increased capacity.