Reviews Reviews

Propshaft and Final Drive

Sort by Price: Low to High
48 Per Page
Split Pin
£0.25 (£0.30 inc VAT)
+ −
Drive Flange Nyloc Nut
£0.30 (£0.36 inc VAT)
5/8" UNF Thread Size
In stock
+ −
3/8 UNF Nyloc Nut
£0.43 (£0.52 inc VAT)
+ −
Bolt - Propshaft Flange
£0.50 (£0.60 inc VAT)
In stock
+ −
Circlip - Axle Extension Housing Bearing
£1.00 (£1.20 inc VAT)
In stock
+ −
Propshaft Grease Nipple - 1/4 UNF Straight
£1.00 (£1.20 inc VAT)
NOTE: Do not leave this in the propshaft.
In stock
+ −
REAR HUB RETAINING NUT WASHER
£1.30 (£1.56 inc VAT)
+ −
Diff. Mounting Plate Retaining Nut Lock Tab Plate
£1.95 (£2.34 inc VAT)
Out-of-stock
Nut - Castle Headed
£1.95 (£2.34 inc VAT)
In stock
+ −
Adjusting Nut Lock Washer
£2.90 (£3.48 inc VAT)
In stock
+ −
Diff Oil Side Seal
£2.99 (£3.59 inc VAT)
In stock
+ −
Diff Backplate Gasket
£3.00 (£3.60 inc VAT)
In stock
+ −
Washer - Diff Mounting - Stainless
£3.30 (£3.96 inc VAT)
In stock
+ −
Diff Pinion Oil Seal - Later Type
£4.15 (£4.98 inc VAT)
In stock
+ −
Driveshaft Rubber Gaiter
£4.50 (£5.40 inc VAT)
In stock
+ −
Rear Hub Inner Seal - Steel Cased
£4.50 (£5.40 inc VAT)
In stock
+ −
Rear Hub Inner Seal - Steel Cased - Neoprene
£4.50 (£5.40 inc VAT)
In stock
+ −
Rear Hub Collapsible Spacer
£5.70 (£6.84 inc VAT)
In stock
+ −
Driveshaft Dust Shield
£5.75 (£6.90 inc VAT)
In stock
+ −
Diff Pinion Spacer - Collapsible
£5.90 (£7.08 inc VAT)
Out-of-stock
Rear Hub Adjuster Spacer (134584)
£7.95 (£9.54 inc VAT)
In stock
+ −
Diff Side Bearing - Outer
£8.75 (£10.50 inc VAT)
In stock
+ −
Diff Side Bearing - Inner
£12.00 (£14.40 inc VAT)
In stock
+ −
Diff Extension Housing Bearing - KSM
£22.00 (£26.40 inc VAT)
In stock
+ −
Diff Side Bearing - Outer - Quality RHP
£25.00 (£30.00 inc VAT)
SIDE DIFF DIFFERENTIAL INPUT SHAFT BEARING
In stock
+ −
Universal Joint - Driveshaft & Propshaft - Heavy Duty
£27.00 (£32.40 inc VAT)
Made with longer rollers and incorporating a thrust washer.
In stock
+ −
Diff Cone and Cup Mount Bush Kit
£30.50 (£36.60 inc VAT)
These polyurethane bushes are tried and tested in the workshop and British made, but perhaps not as 'polished' as the Superpro brand.
Out-of-stock
thumbnail_Rear Hub Bearing Kit.jpg
Rear Hub Bearing Kit - With Quality Bearings
£35.50 (£42.60 inc VAT)

Kit complete with spacer.  We only use high quality Timken bearings in these kits.

In stock
+ −
Diff Extension Housing Bearing - RHP
£40.00 (£48.00 inc VAT)
Out-of-stock
Diff Extension - Surcharge
£80.00 (£96.00 inc VAT)
+ −
Rear Hub Assy - Reconditioning Service
£100.00 (£120.00 inc VAT)

When ordering this item you will need to select the below surcharge. It will then be refunded upon receipt of your old unit.

+ −
Diff Extension - With Strengthened Housing
£100.00 (£120.00 inc VAT)
This is a reconditioned exchange item.  Please also select the  Surcharge when ordering this item.
+ −
Rear Hub Assy - Surcharge
£100.00 (£120.00 inc VAT)

You will need to select this item when ordering the above exchange Driveshaft. It will then be refunded upon receipt of your old unit.

+ −
Differential (Recon. Exch) 3.7:1 Ratio - Surcharge
£250.00 (£300.00 inc VAT)

When ordering the above Diff. you will need to select this surcharge option.  It will then be refunded to you upon receipt of your old unit.

+ −
Differential (Recon. Exch) 3.66.1 - New Crown Wheel & Pinion - Surcharge
£250.00 (£300.00 inc VAT)
Surcharge re Differential with New Crown Wheel and Pinion. Please select this too when ordering the unit. Will be refunded upon receipt of you old unit.
+ −
Diff Mounting Bracket
£260.00 (£312.00 inc VAT)
In stock
+ −
Propshaft (35 BW Auto)
£340.00 (£408.00 inc VAT)
Available from our supplier.  Please allow 2 weeks for delivery. Quality UK made part. Larger diameter shaft to offer improved shaft leverage and...
Out-of-stock
Propshaft - Manual With Overdrive
£350.00 (£420.00 inc VAT)
As original, manufactured in the UK to high tolerances. Split two piece rubber bonded.
Out-of-stock
Propshaft (65 BW Auto)
£365.00 (£438.00 inc VAT)
Available from our supplier.  Please allow 2 weeks for delivery. Quality UK made part. Larger diameter shaft to offer improved shaft leverage and...
Out-of-stock
thumbnail_Drive Shaft.jpg
Driveshaft - Pair - Rilsan Coated
£370.00 (£444.00 inc VAT)

These driveshafts have the Rilsan coated splines and come complete with 2 UJs.  The inner UJ (axle end) is larger diameter to prolong life and reduce wear.

Out-of-stock
thumbnail_Drive Shaft and Hub Assy.jpg
Driveshaft - Pair - Rilsan Coated - Complete With Recon. Rear Hub Assy.
£570.00 (£684.00 inc VAT)

This is for a pair of our new Rilsan coated driveshafts, complete with reconditioned rear hub assemblies fitted. However, please note that these CAN ONLY BE SOLD AND EXCHANGED FOR DRIVESHAFTS WITH UJ's SECURED WITH CIRCLIPS as earlier versions are not able to be refurbished.

When ordering this item you will need to also select the Rear Hub Assembly Surcharge (X 2) as the hubs are an exchange item.

+ −
Differential (Recon. Exch) 3.7:1 Ratio
£610.00 (£732.00 inc VAT)

When ordering this item you will need to select the below surcharge item. This will then be refunded upon receipt of your old unit.

Out-of-stock
Differential (Recon. Exch) 3.45:1 Ratio
£610.00 (£732.00 inc VAT)

When ordering this item you will need to select the below surcharge item. This will then be refunded upon receipt of your old unit.

In stock
+ −
Differential (Recon. Exch) 3.66.1 - New Crown Wheel & Pinion Cut Using Klingelnberg Method
£1,190.00 (£1,428.00 inc VAT)

These are fully reconditioned diffs with our own crown wheels and pinions. The crown wheel and pinion are UK made with a German cut design - Klingelnberg cutting (BMW/Mercedes), hardened and then matched.

When ordering this item you will need to select the SURCHARGE too. This will then be refunded upon receipt of your old unit.

Out-of-stock
Differential (Recon. Exch) Limited Slip With New Crown Wheel & Pinion
£1,840.00 (£2,208.00 inc VAT)

This Rear Axle is fully reconditioned and has has a Helical Spur, limited slip, differential, along with our own crown wheels and pinions. The crown wheel and pinion are UK made with a German cut design - Klingelnberg cutting (ala BMW/Mercedes), hardened and then matched.

When ordering this item you will need to select the SURCHARGE too.  This will then be refunded upon receipt of your old unit.  

In stock
+ −