Engine & Service Parts

£2.00 (£2.40 inc VAT)
Out-of-stock

£1.70 (£2.04 inc VAT)
In stock
+

£17.00 (£20.40 inc VAT)
In stock
+

£4.00 (£4.80 inc VAT)
In stock
+

£1.45 (£1.74 inc VAT)
In stock
+

£8.95 (£10.74 inc VAT)

Kit includes:-

  • 3 Lengths of Rubber Hose
  • 1 Length of Plastic Pipe
  • 1 Plastic T-Piece
  • 2 P Clips to attach Plastic Pipe to front of Engine
+

£0.60 (£0.72 inc VAT)
Back of block
In stock
+

£0.70 (£0.84 inc VAT)
In stock
+

£1.00 (£1.20 inc VAT)
In stock
+

£0.80 (£0.96 inc VAT)
In stock
+

£0.80 (£0.96 inc VAT)
In stock
+

£0.50 (£0.60 inc VAT)
In stock
+

£11.95 (£14.34 inc VAT)
6 x 144686 4 x 143867 2 x 144648 1 x 144688 1 x 144687 1 x 153972
+

£86.00 (£103.20 inc VAT)

Included in this set is:-

  • 2x GEG3305XT - Extra Thick Cylinder Head Gaskets - similar to Payen
  • AJM689/690EJW -1 Set (4) Inlet Manifold Gaskets
  • 2x AJM457-  Cam Cover Gaskets
  • 2x GEG701- Exhaust Flange Gaskets
  • 4x 144488- Head End Rubbers ('D' rubbers)
  • 2x 151310 Head End Water Housing Gaskets
  • 8x 148090- Cam Cover Screw Seals
  • 1x GTG103- Thermostat Gasket
  • 2x 148007- Carb Elbow Gaskets
  • 4x 159871-  Carb to Manifold Gaskets (Pedastal)
  • 1x 153034- O Ring - Pedastal to Manifold)
Out-of-stock

£17.00 (£20.40 inc VAT)
Out-of-stock

£1.30 (£1.56 inc VAT)
Out-of-stock

£13.70 (£16.44 inc VAT)
Colour may vary.
In stock
+

£5.00 (£6.00 inc VAT)
In stock
+

£0.98 (£1.18 inc VAT)
In stock
+

£8.00 (£9.60 inc VAT)
This mounting is now used for the LH and RH.
In stock

£4.00 (£4.80 inc VAT)
In stock
+

Out-of-stock

£89.95 (£107.94 inc VAT)

This Gasket Set Contains:-

  • 2 Extra Thick head Gaskets - Similar type to Payen - CA1012
  • 1 Set Inlet Manifold Gaskets (4 gaskets) - AJM689/90
  • 2 Cam Cover Gaskets - AJM457
  • 2 Exhaust Flange Gaskets - GEG701
  • 4 Head End Rubbers ('D' rubbers) - 144488
  • 2 Head End Water Housing Gaskets - 151310
  • 8 Cam Cover Screw Seals - 148090
  • 1 Thermostat Gasket - GTG103
  • 2 Carb Elbow Gaskets - 148007
  • 2 Carb Elbow to Airbox Gaskets - 153955
  • 4 Carb to Manifold Gaskets (pedastal) -
  • 1 O Ring - (Pedastal to Manifold) - 153034
  • 1 Sump Gasket - 214580
  • 1 Rear Main Seal - 143148
  • 1 Oil Pick Up Pipe Gasket - 147458
  • 1 Set Timing Chain Gaskets (3 Gaskets) - CA1162
  • 1 Oil Seal - Timing Cover - UKC3344
  • 1 Rear Oil Seal Housing Gasket - 143845
  • 1 Oil Transfer Housing O Ring Large - 144958
  • 1 Oil Transfer Housing O Ring Small - 144959
  • Oil Pump to block O Ring - 145861
  • 1 Gasket - 0.010 thick - 145017
  • 1 Gasket - 0.020 thick - 149852
  • 1 Gasket - 0.030 this - 149853
  • 1 Water Pump Housing O ring - 148169
  • 1 Water Pump Housing O ring - 148170
Out-of-stock

£10.00 (£12.00 inc VAT)
+

£0.40 (£0.48 inc VAT)
In stock
+

£9.60 (£11.52 inc VAT)

Contains; 4x 5/16 unc Long bolts, 8x 5/16 unc Short bolts and 12 flat/spring washers.

+

£19.40 (£23.28 inc VAT)

Contains; 4x 5/16 unc Long bolts, 8x 5/16 unc Short bolts and 12 flat/spring washers in polished stainless steel.

In stock
+

£0.75 (£0.90 inc VAT)
In stock
+

£3.25 (£3.90 inc VAT)
+

£79.00 (£94.80 inc VAT)
Out-of-stock

£8.90 (£10.68 inc VAT)
In stock
+

£11.50 (£13.80 inc VAT)
For use in both Diff's and Manual Gearbox's. J Type Requires 2 Litres, A Type Requires 2.13 Litres Rear Axle Requires 1.13 Litres
In stock
+

£5.00 (£6.00 inc VAT)
In stock
+

£8.00 (£9.60 inc VAT)
Uses latest lubricant technology to engineer a premium semi synthetic multigrade for high performance classic engines. Incorporation of high levels...
In stock
+

£32.00 (£38.40 inc VAT)

The Millers Classic Sport really is a superior oil.  Not to be confused with the 'Classic' oil.  This is Classic 'SPORT'.

In stock
+

£60.00 (£72.00 inc VAT)

Millers High Performance Classic 20W50 with Nanodrive technology is the world's finest SAE20W50 fully synthetic engine oil which has been uniquely blended for classic vehicles where vehicle performance improvement is vital. 

  • Massively reduced friction leads to significant power and torque gains, improved fuel economy and a marked reduction in wear and heat generation. 
  • An immediately discernible improvement in performance is achieved. 
  • Up to 63% reduction in friction and 38% reduction in wear when compared to other synthetic 20W50 graded oils.

Formulated with full ZDDP (zinc/phosphorus) for ultimate protection and shear viscocity index improvers.

 

Out-of-stock

£1.30 (£1.56 inc VAT)
Out-of-stock

£14.80 (£17.76 inc VAT)

New increased capacity.

In stock
+

£24.00 (£28.80 inc VAT)
Due to Oil filter sealing O ring issues with inferior quality items, we've invested in tooling and now have the critical part manufactured to a high...
In stock
+

£10.70 (£12.84 inc VAT)
RELATED PRODUCTS Millers Classic Sport- 5l Millers Classic Sport High Performance- 5l Oil Filter Element - Includes O Ring Spin On...
+

£0.65 (£0.78 inc VAT)
In stock
+

£55.00 (£66.00 inc VAT)

In the workshop we have found this pump to be better than uprated ones we have tried, as with those the oil comes through at too high pressure for the Stag.

In stock
+

£1.55 (£1.86 inc VAT)

Pump to Cylinder Block.

In stock
+

£3.95 (£4.74 inc VAT)
In stock
+

£1.00 (£1.20 inc VAT)
In stock
+

£3.00 (£3.60 inc VAT)
Out-of-stock

£0.80 (£0.96 inc VAT)

Pump to Cylinder Block.

In stock
+

£1.15 (£1.38 inc VAT)
In stock
+