Reviews Reviews

Fuel System and Pipes

Sort by Price: High to Low
48 Per Page
thumbnail_Fuel Tank 1.jpg
Aluminium Fuel Tank
£627.00 (£752.40 inc VAT)

It is a direct replacement for the original, but unlike the originals will not rot.  It uses the original sender unit, filler neck and breather pipes, so is fully interchangerble.  Also, the design has straighter sides than the original so will hold more fuel. 

In stock
+ −
Fuel Pump - SU - Electronic - Negative Earth
£155.25 (£186.30 inc VAT)
SU metal body as original but with a modern electronic motor.
Out-of-stock
Carburettor Refurb Kit - Zenith For Stromberg 175 - Less Metering Needles
£140.00 (£168.00 inc VAT)
This kit will do a pair of carbs.
Out-of-stock
Choke Cable (Less Knob)
£80.00 (£96.00 inc VAT)
Our Choke Cables are quality UK made.
In stock
+ −
Fuel Pump - Electronic
£67.50 (£81.00 inc VAT)
In stock
+ −
Fuel Tank Filler Hose - MK2
£65.00 (£78.00 inc VAT)
Out-of-stock
Carb Breather Pipe Kit - Silicone - Black
£50.00 (£60.00 inc VAT)
In stock
+ −
thumbnail_Blue Carb Breather.jpg
Carb Breather Pipe Kit - Silicone - Blue
£50.00 (£60.00 inc VAT)
This item is made to order, therefore please expect delivery within 2 to 3 weeks.
+ −
Fuel Pipe Kit - Under Floor
£45.00 (£54.00 inc VAT)
Includes copper, plastic and stainless braided fuel pipe and clips.
In stock
+ −
thumbnail_Under Bonnet Fuel Pipe - Braided.jpg
Fuel Pipe Kit - Under Bonnet - Braided
£40.00 (£48.00 inc VAT)
In stock
+ −
thumbnail_Fuel Pipe Kit 1.jpg
Fuel Pipe Kit - Under Bonnet
£39.50 (£47.40 inc VAT)
Includes - Fuel Pipe, Full Stailess Steel Hose Clips, T-Piece, Reducer and Fuel Filter.
In stock
+ −
Fuel Tank Sender Unit And Float
£37.50 (£45.00 inc VAT)
In stock
+ −
Carburettor Link Rod Kit - Stainless Steel
£32.50 (£39.00 inc VAT)

Also known as carb. ball joint.

In stock
+ −
thumbnail_Needle Valve - Viton.jpg
Carb Needle Valve inc.washers - Viton Tipped - Zenith
£28.50 (£34.20 inc VAT)

Includes washers.

Out-of-stock
Millers VSPe Power Plus Multishot - 500ml
£27.50 (£33.00 inc VAT)

 

 

In stock
+ −
Carb Vent Pipe Kit - With Stainless Steel Pipes
£27.50 (£33.00 inc VAT)
In stock
+ −
Banjo Union Connector - Fuel Pipe to Fuel Pump - Brass Plated
£26.00 (£31.20 inc VAT)
Brass plated Banjo 5/16" Push on Bright Zinc Plated.
In stock
+ −
Float Assembly
£25.75 (£30.90 inc VAT)
In stock
+ −
thumbnail_Metering Needle.jpg
Carb Metering Needle - Zenith Richer
£23.50 (£28.20 inc VAT)

Richer needle.  Works with Tubular Manifolds and K & N Filter Element.

In stock
+ −
thumbnail_Metering Needle.jpg
Carb Metering Needle - Zenith Standard
£21.50 (£25.80 inc VAT)
In stock
+ −
Carb to Pedestal Insulator
£19.95 (£23.94 inc VAT)
Out-of-stock
Millers EPS Multi Shot - 500ml
£19.00 (£22.80 inc VAT)
A fuel treatment that protects against ethanol corrosion when using petrol (E5/E10). Recommended for use in vehicles with hardened valve seats....
In stock
+ −
Air Cleaner Elbow To Carb Bolt Set - Stainless Steel
£16.20 (£19.44 inc VAT)
Includes; 4 Long Bolts, 2 Short Bolts and 6 Washers all in a bright Stainless finish
In stock
+ −
Choke Knob - Made From Anodised Aluminium
£15.00 (£18.00 inc VAT)
Frustrated with the quality of plastic choke knobs we have had them made in Aluminium and anodised to give a lovely black sheen.  We have also had the grub...
+ −
Fuel Pump Mounting Bracket - used
£15.00 (£18.00 inc VAT)
Out-of-stock
thumbnail_float chamber bung.jpg
Float Chamber plug
£13.00 (£15.60 inc VAT)
In stock
+ −
Carb Breather Pipe Kit
£12.95 (£15.54 inc VAT)
7.60 Total
Out-of-stock
Carb Main Jets
£12.00 (£14.40 inc VAT)
In stock
+ −
thumbnail_Carb Adj Tool.jpg
Carb Adjusting Tool
£11.75 (£14.10 inc VAT)
In stock
+ −
Carb Gasket Kit (for one carb) Zenith
£11.60 (£13.92 inc VAT)
Suitable for Mk1 or Mk2
In stock
+ −
thumbnail_Hot Air Intake.jpg
Warm Air Intake Pipe
£11.50 (£13.80 inc VAT)
Out-of-stock
Fuel Filter Holder Assembly - Stainless Steel
£11.50 (£13.80 inc VAT)
In stock
+ −
Fuel Tank Pick Up Pipe
£10.00 (£12.00 inc VAT)
Out-of-stock
thumbnail_T-Piece.jpg
Fuel Pipe T-Piece Kit
£10.00 (£12.00 inc VAT)
Metal T-Piece with adapter.
In stock
+ −
Choke Cable Switch - Used
£10.00 (£12.00 inc VAT)
Out-of-stock
Vacuum Pipe to Carb Adapter
£9.25 (£11.10 inc VAT)
Locates into RH carb body.
In stock
+ −
Ethanol Resistant Reinforced Rubber Fuel Hose - Main Fuel Line To Filter & Filter To Carbs - 5/16" (per m)
£9.00 (£10.80 inc VAT)
+ −
Carb Overflow Pipe Kit
£8.95 (£10.74 inc VAT)

Kit includes:-

  • 3 Lengths of Rubber Hose
  • 1 Length of Plastic Pipe
  • 1 Plastic T-Piece
  • 2 P Clips to attach Plastic Pipe to front of Engine
+ −
Accelerator Cable - Quality UK Made
£8.90 (£10.68 inc VAT)
Out-of-stock
Carb Diaphragm
£8.50 (£10.20 inc VAT)
Out-of-stock
Ethanol Resistant Reinforced Rubber Fuel Hose - Filter To Carbs - 1/4" (per m)
£8.50 (£10.20 inc VAT)
+ −
Carburettor Damper Spring
£8.00 (£9.60 inc VAT)
In stock
+ −
Choke Bracket
£7.50 (£9.00 inc VAT)
+ −
Needle Adjusting Screw
£6.35 (£7.62 inc VAT)
In stock
+ −
Carburettor Needle Retaining Screw
£6.25 (£7.50 inc VAT)
In stock
+ −
Banjo Union Connector - Fuel Pipe to Fuel Pump
£5.95 (£7.14 inc VAT)
Out-of-stock
Carb Vent Pipe T Piece - Connects into Back of Air Cleaner
£4.30 (£5.16 inc VAT)
In stock
+ −
Accelerator Pedal Return Spring
£3.90 (£4.68 inc VAT)
TR6 - Also used as Clutch and Brake Pedal Return Spring
In stock
+ −
 Prev
1 2
Next