CODE: 7/16Spring

7/16 Spring Washer

£0.08 (£0.10 inc VAT)

CODE: 7/16-1.5BOLT

7/16 UNF 1 1/2" Bolt

£0.90 (£1.08 inc VAT)

CODE: 7/16UNF1SET

7/16 UNF 1" Set Screw

£0.18 (£0.22 inc VAT)

CODE: 7/16-2BOLT

7/16 UNF 2" Bolt

£0.92 (£1.10 inc VAT)

CODE: 7/16UNFNyloc

7/16 UNF Nyloc Nut

£0.28 (£0.34 inc VAT)

CODE: 7/16NUT

7/16" UNF NUT

£0.20 (£0.24 inc VAT)

CODE: CA2005

8 x 1/2 Pozidrive Mushroom Self tap screw - Stainless Steel

£0.20 (£0.24 inc VAT)

Availability: In stock

CODE: COOC-08

8mm Copper Compression Olive

£0.45 (£0.54 inc VAT)

Availability: In stock

CODE: 630755

A Post Seal and Hard Top B Post Seal

£4.00 (£4.80 inc VAT)

Availability: In stock

CODE: 502556

A Type Adaptor Plate To Overdrive Gasket

£1.65 (£1.98 inc VAT)

Availability: In stock

CODE: 311772R

A Type Overdrive - Reconditioning Service

£690.00 (£828.00 inc VAT)

This is a reconditioning service. Please call ahead to arrange sending us your overdrive unit. Turnaround time approximately 2 weeks.

CODE: 109521

A Type Overdrive Solenoid

£33.50 (£40.20 inc VAT)

CODE: 110867

A Type Overdrive Solenoid Gasket

£1.00 (£1.20 inc VAT)

Availability: In stock

CODE: 153235

Accelerator Cable - Quality UK Made

£8.90 (£10.68 inc VAT)

CODE: 57950

Accelerator Pedal Return Spring

£3.90 (£4.68 inc VAT)

TR6 - Also used as Clutch and Brake Pedal Return Spring

Availability: In stock

CODE: 150881

Accelerator Pedal Rubber

£2.50 (£3.00 inc VAT)

Availability: In stock

CODE: 153041

Accelerator To Pedal Clip

£2.00 (£2.40 inc VAT)

CODE: 155148

Adapter - Carb To Breather Pipe

£1.70 (£2.04 inc VAT)

Availability: In stock

CODE: 154934

Adaptor - Carb Breather Pipe

£1.35 (£1.62 inc VAT)

Availability: In stock

CODE: CA2070

Adaptor For Capillary Type Water Temperature Gauge

£8.50 (£10.20 inc VAT)

Allows the capillary sensor to be fitted in place of the standard electrical transmitter.

Availability: In stock

CODE: 139057

Adjusting Nut Lock Washer

£2.90 (£3.48 inc VAT)

Availability: In stock

CODE: 41525

Advance Spring Set

£9.00 (£10.80 inc VAT)

Availability: In stock

CODE: CA1111DAB

Aerial - DAB radio internal windscreen active antenna

£31.00 (£37.20 inc VAT)

Availability: In stock

CODE: CA1111

Aerial - Manual

£14.50 (£17.40 inc VAT)

Large base, pull up type. Suitable for mounting on Stag rear wing.

Availability: In stock

CODE: CA1111Cable

Aerial Extension Cable - 4.5 Metre

£12.50 (£15.00 inc VAT)

CODE: RTC312

Air Box Seal

£3.25 (£3.90 inc VAT)

CODE: 153955

Air Box To Inlet Elbow Gasket

£1.00 (£1.20 inc VAT)

Availability: In stock

CODE: 157912

Air Box Vacuum Pipe - Long

£4.50 (£5.40 inc VAT)

CODE: 157911

Air Box Vacuum Pipe - Short

£0.50 (£0.60 inc VAT)

CODE: CA1167

Air Cleaner Elbow To Carb Bolt Set - Stainless Steel

£16.20 (£19.44 inc VAT)

Includes; 4 Long Bolts, 2 Short Bolts and 6 Washers all in a bright Stainless finish

Availability: In stock

CODE: GFE1040

Air Filter Element

£20.00 (£24.00 inc VAT)

Availability: In stock

CODE: CA1148

Air Filter Label

£3.00 (£3.60 inc VAT)

CODE: 156028

Air Intake Gaiter

£11.40 (£13.68 inc VAT)

Availability: In stock

CODE: 217382ss

Air Scoop - Above Radiator - Stainless Steel

£76.80 (£92.16 inc VAT)

BRUSH FINISH STAINLESS STEEL. LOOKS SMART, AND ELIMINATES THE POSSIBILITY OF ANY RUST ENTERING YOUR ENGINE FROM YOUR 40+ YEAR OLD ORIGINAL INTAKE

Availability: In stock

CODE: CA2032

Alfa At Brooklands

£60.00 (£72.00 inc VAT)

Availability: In stock

CODE: CA2007

Alfa Romeo 8C 2300

£95.00 (£114.00 inc VAT)

.The Alfa Romeo 8C 2300 is a Limited Edition print. Only 100 will be produced.

The print comes unframed and delivery time is usually within 10 days.

Availability: In stock

CODE: 313250B

Alloy Wheel - Black Spokes - New

£150.00 (£180.00 inc VAT)

Available from our supplier. Please allow approximately 1 week for delivery.

CODE: 159998

Alloy Wheel Centre Disc

£2.25 (£2.70 inc VAT)

Availability: In stock

CODE: CA1047

Alloy Wheel Centre, Clips & Logo Kit (4 Wheel Set)

£11.50 (£13.80 inc VAT)

CODE: 218742-55AMP

Alternator - 55 AMP - Powerlite

£75.00 (£90.00 inc VAT)

This alternator is designed for the Mk2 Stag. The Mk1 alternator is not available , however with some modification to the wiring this unit can be used for the Mk1 as well. We can give some wiring instructions if require for the Mk1. Please telephone or email if you require further information.

Availability: In stock

CODE: 218742-80-WOSP

Alternator - 80 AMP - WOSP - Superior Quality

£220.00 (£264.00 inc VAT)

This alternator is designed for the Mk2 Stag. The Mk1 alternator is not available , however with some modification to the wiring this unit can be used for the Mk1 as well. We can give some wiring instructions if require for the Mk1. Please telephone or email if you require further information.

CODE: 151209

Alternator Belt

£4.00 (£4.80 inc VAT)

Availability: In stock

CODE: BH605401A

Alternator Long Mounting Bolt, Washers and Nut.

£2.75 (£3.30 inc VAT)

X1 5/16 UNF 5" Bolt X1 5/16 UNF Nut X1 5/16 Spring Washer X2 5/16 Flat Washer

CODE: CA1058

Alternator Mounting Bracket Kit (inc. Wiring Harness, Belt and Fixings)

£87.90 (£105.48 inc VAT)

To be used in conjunction with our High Output Alternator, for relocating the Alternator.

As from June 08 the wiring harness is an improved design with molded plastic alternator plug, warning light and battery cable terminals, as O.E. spec.

NOTE: This product will not align with an original type alternator.

Availability: In stock

CODE: CA2027

Alternator Mounting Bracket Only - Designed to fit the Alternators we supply

£68.50 (£82.20 inc VAT)

This product is compatible for our High Output Alternator (or the Lucas 80 amp type).

Availability: In stock

CODE: CA2029/978

Alternator Wiring Harness

£17.00 (£20.40 inc VAT)

Availability: In stock

CODE: CA2029/978EXT

Alternator Wiring Harness - Extended

£20.00 (£24.00 inc VAT)

Availability: In stock

CODE: 312402ALI

Aluminium Fuel Tank

£627.00 (£752.40 inc VAT)

It is a direct replacement for the original, but unlike the originals will not rot. It uses the original sender unit, filler neck and breather pipes, so is fully interchangerble. Also, the design has straighter sides than the original so will hold more fuel.

Availability: In stock